Home
 
   
CNC / Machining   

Computerized, numerically controlled equipment means quality work on time for you. CNC production equipment allows us to use the most efficient machines for the job.

The abbreviation CNC stands for Computer Numerical Control, and refers specifically to the computer "controller" of that reads the G-code instructions and drives the machine tool.

CNC was developed in the late 1940s and early 1950s by the MIT Servomechanisms Laboratory. CNC was preceded by NC (Numerically Controlled) machines, which did the same job of interpreting G-code recorded on Punched tape into motions of the machine using a electronic hardware. The first CNCs used NC hardware, and the computer was used for the tool compensation calculations and sometimes for editing.

For more information, see Wikipedia: http://en.wikipedia.org/wiki/CNC

  

Chamtek's CNC Machines

(1) Vertical Machining Center 1300: 50” X 22” x 20” Work Area

         -20 HP, 20 Tool Carousel, 8000 rpm

(1) Vertical Machining Center 4024: 40” X 24” X 27” Work Area

         -25 HP, 20 Tool Carousel

(1) Fair Friend Ent. Co., LTD Vertical Center:

         -Model FV-800 Fanuc-0MC Controller

         -31.5” X 20” X 20” Table Travel

(1) Proto Track 19 2-Axix Milling Machine

(1) Hitachi Seiki Lathe:

         -Turn 20S-2 Capacity, 2” Thru Spindle, 18: Diameter Work Piece

         -15” Between Centers, Super Hydro Bar Feeder

(1) Harig 618 CNC Surface Grinder

   
 
  123 Louise Street, Rochester, NY 14606|(585)328-4900|Fax(585)328-2938|email:chamtek@frontiernet.net    Login   Register  
   
 
Site Powered by ITX
>